Если нужно обучить дроссельную заслонку (например, приспичило ее почистить).....
THROTTLE VALVE CLOSED POSITION LEARNING
Work Procedure
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
Эта процедура делается обычно вместе со второй, поскольку процедуры друг от друга зависят
ACCELERATOR PEDAL RELEASED POSITION LEARNING
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Repeat steps 2 to 3 for three times.
THROTTLE VALVE CLOSED POSITION LEARNING
Work Procedure
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
Эта процедура делается обычно вместе со второй, поскольку процедуры друг от друга зависят
ACCELERATOR PEDAL RELEASED POSITION LEARNING
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Repeat steps 2 to 3 for three times.